Dreh-Speed Dropdown im Admin, Kalibrierungsversuch rückgängig gemacht

- Auto-Rotate Speed wählbar: 20-50% in 5er-Schritten (Standard 20%)
- BNO085 Magnetometer-Kalibrierung: calibration_status liefert immer 0,
  da der Sensor 3D-Bewegung benötigt die am Boden nicht möglich ist.
  Kalibrierungs-Feature vollständig entfernt.
- Empfehlung: Nord-Offset nach jedem Neustart neu setzen.

Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>

README.md

@@ -162,6 +162,14 @@ docker exec -it exomy_autostart bash
 - Grund: Der restliche ROS-Stack im Container nutzt noch überwiegend Python 2, der BNO085-Treiber benötigt aber Python 3.
 - Der Service `exomy-imu-ros.service` liest den Sensor und publiziert über `rosbridge` nach ROS.
 
+### IMU-Einbaulage und Achsen-Remapping
+
+Der BNO085 ist um 90° um die Z-Achse verdreht eingebaut. Dadurch wären die X- und Y-Achsen des Sensors gegenüber dem Rover-Koordinatensystem vertauscht — Roll und Pitch kämen vertauscht an.
+
+`imu_node.py` korrigiert das direkt beim Publizieren: X- und Y-Komponenten werden für Quaternion, Gyro, Beschleunigung und Magnetfeld getauscht. Alle anderen Teile des Systems (GUI, Admin-API) sehen bereits korrekte Daten und müssen nichts kompensieren.
+
+Wenn der Sensor jemals neu ausgerichtet eingebaut wird, muss das Remapping in `publish_measurements()` in `imu_node.py` entsprechend angepasst oder entfernt werden.
+
 ### IMU-Topics
 
 | Topic | Typ | Inhalt |
@@ -278,6 +286,60 @@ math.atan((self.wheel_rx + self.wheel_fx) / self.wheel_ry))
 
 ---
 
+## Auto-Rotate (automatisches Drehen zu einem Ziel-Heading)
+
+Die Admin-Seite (`http://<IP>:8000/admin.html`) enthält im IMU-Bereich eine Funktion, mit der der Rover automatisch zu einem eingegebenen Ziel-Heading dreht.
+
+### Bedienung
+
+1. Zielwinkel eingeben (0–359°, wobei 0 = Nord, 90 = Ost, 180 = Süd, 270 = West — **nach Nord-Kalibrierung**)
+2. „Zu Heading drehen" drücken
+3. Der Rover dreht auf der Stelle und stoppt automatisch bei ±1° Genauigkeit
+4. „Drehung abbrechen" bricht den Vorgang vorzeitig ab
+
+### Technischer Ablauf
+
+```
+Admin-API
+  → startet auto_rotate_ros.py via docker exec im Container
+  → setzt rosparam /auto_rotate_active = True
+      → joystick_parser_node ignoriert ALLE Eingaben (Web-GUI, D-Pad, F710)
+  → auto_rotate_ros.py dreht mit Point-Turn-Modus bei fester Geschwindigkeit (~20 %)
+  → bei Ziel erreicht (oder Abbruch):
+      → rosparam /auto_rotate_active = False  ← erst jetzt wird Steuerung freigegeben
+      → letzter Fahrmodus (vor der Drehung) wird wiederhergestellt
+```
+
+### Wichtige Hinweise
+
+- **Geschwindigkeit:** Fest auf ~20 % (entspricht `vel=4` durch die Expo-Kurve), unabhängig vom eingestellten Speed-Limit in der Admin-Seite.
+- **Nord-Kalibrierung muss gesetzt sein:** Der Zielwinkel bezieht sich auf den kalibrierten Norden. Ohne Kalibrierung dreht der Rover zum magnetischen Roh-Heading.
+- **Kein manuelles Eingreifen während der Drehung:** Joystick, D-Pad und F710 sind über `rosparam /auto_rotate_active` vollständig blockiert. Erst nach Abschluss oder Abbruch wird die Steuerung freigegeben.
+- **Fahrmodus:** Der Rover wechselt intern in den Point-Turn-Modus und kehrt danach automatisch in den zuvor aktiven Modus zurück (Ackermann, Point Turn oder Crabbing).
+- **Neigungskalibrierung:** Wenn die IMU-Neigung genullt wurde, gilt das nur für die Anzeige — die Rotation selbst nutzt nur den Yaw-Winkel.
+
+### Dateien
+
+| Datei | Beschreibung |
+|---|---|
+| `scripts/auto_rotate_ros.py` | Läuft im Docker-Container, nativer rospy-Node |
+| `scripts/imu_rotate.py` | Steuerung des docker-exec-Prozesses, Status-Tracking |
+
+### Deploy nach Änderungen
+
+```bash
+# auto_rotate_ros.py oder joystick_parser_node.py geändert:
+scp scripts/auto_rotate_ros.py pi@192.168.1.9:/home/pi/ExoMy_Software/scripts/
+scp src/joystick_parser_node.py pi@192.168.1.9:/home/pi/ExoMy_Software/src/
+ssh pi@192.168.1.9 "sudo docker restart exomy_autostart"
+
+# imu_rotate.py oder exomy_admin_api.py geändert:
+scp scripts/imu_rotate.py scripts/exomy_admin_api.py pi@192.168.1.9:/home/pi/ExoMy_Software/scripts/
+ssh pi@192.168.1.9 "sudo systemctl restart exomy-admin-api.service"
+```
+
+---
+
 ## Fahrmodi
 
 | Modus | Taste (Controller) | Taste (Web-GUI) |

gui/admin.html

@@ -153,8 +153,65 @@
             <span class="sr-key">Nord-Offset</span>
             <strong id="imu_heading_offset" class="sr-val">-</strong>
           </div>
+          <div class="sr">
+            <span class="sr-led led-ok"></span>
+            <span class="sr-key">Roll korr.</span>
+            <strong id="imu_roll_corrected" class="sr-val">-</strong>
+          </div>
+          <div class="sr">
+            <span class="sr-led led-ok"></span>
+            <span class="sr-key">Pitch korr.</span>
+            <strong id="imu_pitch_corrected" class="sr-val">-</strong>
+          </div>
+          <div class="sr">
+            <span class="sr-led led-off"></span>
+            <span class="sr-key">Neig.-Offset</span>
+            <strong id="imu_tilt_offset" class="sr-val">-</strong>
+          </div>
           <div class="act-grid">
             <button class="act-btn subtle full" onclick="setImuNorth()">Aktuelle Richtung als Norden setzen</button>
+            <button class="act-btn subtle full" onclick="setImuLevel()">Aktuelle Neigung als Null setzen</button>
+          </div>
+          <div class="sr">
+            <span class="sr-led led-off"></span>
+            <span class="sr-key">HUD-Farbe</span>
+            <span class="sr-val" style="display:flex;align-items:center;gap:6px;">
+              <input type="color" id="hud_color_picker" value="#00ff91" style="width:32px;height:22px;border:none;background:none;cursor:pointer;padding:0;" oninput="applyHudColorFromAdmin(this.value)" onchange="applyHudColorFromAdmin(this.value)">
+              <button class="act-btn subtle" style="padding:2px 8px;font-size:11px;" onclick="resetHudColor()">Reset</button>
+            </span>
+          </div>
+          <div class="sr">
+            <span class="sr-led led-off"></span>
+            <span class="sr-key">Ziel-Heading</span>
+            <span class="sr-val" style="display:flex;align-items:center;gap:6px;">
+              <input type="number" id="rotate_target" min="0" max="359" step="1" value="0"
+                style="width:60px;background:#111;color:#eee;border:1px solid #444;padding:2px 4px;font-size:12px;border-radius:3px;">
+              <span style="font-size:11px;color:#888;">° (0=N, 90=O, 180=S, 270=W)</span>
+            </span>
+          </div>
+          <div class="sr">
+            <span class="sr-led led-off"></span>
+            <span class="sr-key">Dreh-Speed</span>
+            <span class="sr-val">
+              <select id="rotate_speed" class="ctrl-select" style="font-size:11px;padding:2px 4px;">
+                <option value="20" selected>20 % (Standard)</option>
+                <option value="25">25 %</option>
+                <option value="30">30 %</option>
+                <option value="35">35 %</option>
+                <option value="40">40 %</option>
+                <option value="45">45 %</option>
+                <option value="50">50 %</option>
+              </select>
+            </span>
+          </div>
+          <div class="act-grid">
+            <button class="act-btn subtle full" id="rotate_start_btn" onclick="startRotate()">Zu Heading drehen</button>
+            <button class="act-btn subtle full" id="rotate_stop_btn" onclick="stopRotate()" style="display:none;">Drehung abbrechen</button>
+          </div>
+          <div class="sr" id="rotate_status_row" style="display:none;">
+            <span class="sr-led led-blue" id="rotate_status_led"></span>
+            <span class="sr-key">Drehung</span>
+            <strong id="rotate_status_val" class="sr-val" style="font-family:var(--mono);white-space:pre;">-</strong>
           </div>
           <div class="sr">
             <span class="sr-led led-off"></span>
@@ -963,6 +1020,10 @@
     headingRawDeg: null,
     headingCorrectedDeg: null,
     headingOffsetDeg: 0,
+    rollRawDeg: null,
+    pitchRawDeg: null,
+    rollOffsetDeg: 0,
+    pitchOffsetDeg: 0,
     error: '--',
     lastDataAt: 0,
     lastMagAt: 0,
@@ -1072,6 +1133,8 @@
     imuRosState.rollPitchYaw = '--';
     imuRosState.headingRawDeg = null;
     imuRosState.headingCorrectedDeg = null;
+    imuRosState.rollRawDeg = null;
+    imuRosState.pitchRawDeg = null;
     imuRosState.error = 'Keine ROS-Verbindung';
     imuRosState.lastDataAt = 0;
     imuRosState.lastMagAt = 0;
@@ -1350,6 +1413,11 @@
     setText('imu_heading_raw', dataFresh ? formatHeadingDeg(imuRosState.headingRawDeg) : '--');
     setText('imu_heading_corrected', dataFresh ? formatHeadingDeg(imuRosState.headingCorrectedDeg) : '--');
     setText('imu_heading_offset', formatHeadingOffsetDeg(imuRosState.headingOffsetDeg));
+    var corrRoll = dataFresh && imuRosState.rollRawDeg !== null ? imuRosState.rollRawDeg + imuRosState.rollOffsetDeg : null;
+    var corrPitch = dataFresh && imuRosState.pitchRawDeg !== null ? imuRosState.pitchRawDeg + imuRosState.pitchOffsetDeg : null;
+    setText('imu_roll_corrected', corrRoll !== null ? corrRoll.toFixed(1) + '°' : '--');
+    setText('imu_pitch_corrected', corrPitch !== null ? corrPitch.toFixed(1) + '°' : '--');
+    setText('imu_tilt_offset', 'R ' + imuRosState.rollOffsetDeg.toFixed(1) + '° | P ' + imuRosState.pitchOffsetDeg.toFixed(1) + '°');
     setText('imu_error', error || '-');
   }
 
@@ -2663,6 +2731,8 @@
       imuRosState.headingCorrectedDeg = Array.isArray(eulerDeg)
         ? normalizeHeadingDeg(eulerDeg[2] + Number(imuRosState.headingOffsetDeg || 0))
         : null;
+      imuRosState.rollRawDeg = Array.isArray(eulerDeg) ? eulerDeg[0] : null;
+      imuRosState.pitchRawDeg = Array.isArray(eulerDeg) ? eulerDeg[1] : null;
       imuRosState.lastDataAt = Date.now();
       if (!imuRosState.error || imuRosState.error === 'Keine ROS-Verbindung' || imuRosState.error === 'Noch keine frischen IMU-Daten') {
         imuRosState.error = '';
@@ -2712,6 +2782,11 @@
     if (typeof imuHeading.offset_deg === 'number') imuRosState.headingOffsetDeg = imuHeading.offset_deg;
     if (typeof imuHeading.raw_heading_deg === 'number') imuRosState.headingRawDeg = imuHeading.raw_heading_deg;
     if (typeof imuHeading.corrected_heading_deg === 'number') imuRosState.headingCorrectedDeg = imuHeading.corrected_heading_deg;
+    var imuTilt = data.imu_tilt || {};
+    if (typeof imuTilt.roll_offset_deg === 'number') imuRosState.rollOffsetDeg = imuTilt.roll_offset_deg;
+    if (typeof imuTilt.pitch_offset_deg === 'number') imuRosState.pitchOffsetDeg = imuTilt.pitch_offset_deg;
+    if (typeof imuTilt.raw_roll_deg === 'number') imuRosState.rollRawDeg = imuTilt.raw_roll_deg;
+    if (typeof imuTilt.raw_pitch_deg === 'number') imuRosState.pitchRawDeg = imuTilt.raw_pitch_deg;
     setAdminStatus(data.status || 'Bereit');
     setText('info_ips', system.ips);
     setText('info_wifi', system.wifi);
@@ -2786,6 +2861,27 @@
     }
   }
 
+  (function() {
+    try {
+      var h = localStorage.getItem('hudHexColor');
+      if (h) {
+        var el = document.getElementById('hud_color_picker');
+        if (el) el.value = '#' + h;
+      }
+    } catch(e) {}
+  })();
+
+  function applyHudColorFromAdmin(cssColor) {
+    var hex = cssColor.replace('#', '');
+    try { localStorage.setItem('hudHexColor', hex); } catch(e) {}
+  }
+
+  function resetHudColor() {
+    var el = document.getElementById('hud_color_picker');
+    if (el) el.value = '#00ff91';
+    applyHudColorFromAdmin('#00ff91');
+  }
+
   async function setImuNorth() {
     if (!window.confirm('Rover jetzt wirklich sauber nach Norden ausgerichtet?')) return;
     setAdminStatus('Speichere Nordrichtung...');
@@ -2806,6 +2902,111 @@
     }
   }
 
+  async function setImuLevel() {
+    if (!window.confirm('Rover jetzt wirklich waagerecht aufgestellt?')) return;
+    setAdminStatus('Speichere Neigungsoffset...');
+    try {
+      var response = await fetch(adminApiBase + '/api/imu/set-level', { method: 'POST' });
+      var data = await response.json();
+      if (!response.ok) throw new Error(data.status || ('status ' + response.status));
+      var imuTilt = data.imu_tilt || {};
+      if (typeof imuTilt.roll_offset_deg === 'number') imuRosState.rollOffsetDeg = imuTilt.roll_offset_deg;
+      if (typeof imuTilt.pitch_offset_deg === 'number') imuRosState.pitchOffsetDeg = imuTilt.pitch_offset_deg;
+      if (typeof imuTilt.raw_roll_deg === 'number') imuRosState.rollRawDeg = imuTilt.raw_roll_deg;
+      if (typeof imuTilt.raw_pitch_deg === 'number') imuRosState.pitchRawDeg = imuTilt.raw_pitch_deg;
+      renderImuRosState();
+      setAdminStatus(data.status || 'Neigung genullt');
+      window.setTimeout(fetchStatus, 500);
+    } catch (error) {
+      setAdminStatus('Neigungskalibrierung fehlgeschlagen');
+      alert(error.message || 'Neigung konnte nicht genullt werden.');
+    }
+  }
+
+  var rotatePoller = null;
+
+  function updateRotateUi(rotate) {
+    if (!rotate) return;
+    var running = rotate.result === 'running';
+    var startBtn = document.getElementById('rotate_start_btn');
+    var stopBtn  = document.getElementById('rotate_stop_btn');
+    var row      = document.getElementById('rotate_status_row');
+    var val      = document.getElementById('rotate_status_val');
+    var led      = document.getElementById('rotate_status_led');
+    if (startBtn) startBtn.style.display = running ? 'none' : '';
+    if (stopBtn)  stopBtn.style.display  = running ? ''     : 'none';
+    if (row) row.style.display = rotate.result === 'idle' ? 'none' : '';
+    if (led) {
+      led.className = 'sr-led ' + (
+        rotate.result === 'done'    ? 'led-ok' :
+        rotate.result === 'error'   ? 'led-warn' :
+        rotate.result === 'aborted' ? 'led-warn' : 'led-blue'
+      );
+    }
+    if (val) {
+      var txt = rotate.message || '-';
+      if (running && rotate.current_deg !== null && rotate.error_deg !== null) {
+        var cur  = Number(rotate.current_deg).toFixed(1).padStart(6, ' ');
+        var rest = Number(rotate.error_deg).toFixed(1).padStart(7, ' ');
+        txt += ' | Ist:' + cur + '° | Rest:' + rest + '°';
+      }
+      val.textContent = txt;
+    }
+    if (!running && rotatePoller) {
+      clearInterval(rotatePoller);
+      rotatePoller = null;
+      try { localStorage.removeItem('autoRotateActive'); } catch(e) {}
+    }
+  }
+
+  async function startRotate() {
+    var input = document.getElementById('rotate_target');
+    var speedEl = document.getElementById('rotate_speed');
+    var target = parseFloat(input ? input.value : 0);
+    var speedPct = speedEl ? parseInt(speedEl.value) : 20;
+    if (isNaN(target)) { alert('Ungültiger Winkel'); return; }
+    setAdminStatus('Starte Drehung zu ' + target + '°…');
+    try {
+      var response = await fetch(adminApiBase + '/api/imu/rotate-to', {
+        method: 'POST',
+        headers: {'Content-Type': 'application/json'},
+        body: JSON.stringify({target_deg: target, speed_pct: speedPct})
+      });
+      var data = await response.json();
+      if (!response.ok) throw new Error(data.status || ('status ' + response.status));
+      try { localStorage.setItem('autoRotateActive', '1'); } catch(e) {}
+      updateRotateUi(data.rotate);
+      setAdminStatus(data.status || 'Drehung gestartet');
+      if (rotatePoller) clearInterval(rotatePoller);
+      rotatePoller = setInterval(pollRotateStatus, 300);
+    } catch (e) {
+      setAdminStatus('Fehler: ' + (e.message || 'unbekannt'));
+      alert(e.message || 'Drehung konnte nicht gestartet werden.');
+    }
+  }
+
+  async function stopRotate() {
+    setAdminStatus('Stoppe Drehung…');
+    try {
+      var response = await fetch(adminApiBase + '/api/imu/rotate-stop', { method: 'POST' });
+      var data = await response.json();
+      try { localStorage.removeItem('autoRotateActive'); } catch(e) {}
+      updateRotateUi(data.rotate);
+      setAdminStatus(data.status || 'Drehung gestoppt');
+    } catch (e) {
+      setAdminStatus('Fehler beim Stoppen');
+    }
+  }
+
+  async function pollRotateStatus() {
+    try {
+      var response = await fetch(adminApiBase + '/api/imu/rotate-status');
+      if (!response.ok) return;
+      var data = await response.json();
+      updateRotateUi(data.rotate);
+    } catch (e) {}
+  }
+
   async function fetchDelay() {
     try {
       var response = await fetch(adminApiBase + '/api/delay');

gui/app.css

@@ -217,10 +217,15 @@ header {
   background: rgba(0,255,145,.07);
 }
 .dbtn.active {
-  border-color: rgba(0,255,145,.7);
+  border-color: rgba(220,50,50,.75);
-  background: rgba(0,255,145,.1);
+  background: rgba(200,30,30,.12);
-  color: #00ff91;
+  color: #ff6060;
-  box-shadow: 0 0 20px rgba(0,255,145,.25), inset 0 0 14px rgba(0,255,145,.06);
+  box-shadow: 0 0 16px rgba(220,50,50,.25), inset 0 0 10px rgba(200,30,30,.07);
+  animation: active-pulse 2.8s ease-in-out infinite;
+}
+@keyframes active-pulse {
+  0%,100% { box-shadow: 0 0 10px rgba(220,50,50,.18), inset 0 0 8px rgba(200,30,30,.05); }
+  50%      { box-shadow: 0 0 22px rgba(220,50,50,.45), inset 0 0 14px rgba(200,30,30,.12); }
 }
 @keyframes mode-flash {
   0%   { box-shadow: 0 0 0px rgba(0,255,145,0),  background-color: var(--pri); }
@@ -281,10 +286,11 @@ header {
   top: 50%;
   left: 50%;
   transform: translate(-50%, -50%);
-  width: calc(270px * var(--cam-scale));
+  width: calc(405px * var(--cam-scale));
-  height: calc(270px * var(--cam-scale));
+  height: calc(405px * var(--cam-scale));
   z-index: 10;
   pointer-events: none;
+  filter: drop-shadow(0 0 1.5px rgba(0,0,0,.9)) drop-shadow(0 0 3px rgba(0,0,0,.6));
 }
 @keyframes xh-spin { to { transform: rotate(360deg); } }
 @keyframes xh-pulse {
@@ -543,7 +549,13 @@ body.page-connection-degraded .admin-shell{
   transition: all .15s;
   text-transform: uppercase;
 }
-.mtbtn.active { background: rgba(0,255,145,.1); color: #00ff91; border-color: rgba(0,255,145,.5); box-shadow: 0 0 12px rgba(0,255,145,.2); }
+.mtbtn.active {
+  background: rgba(200,30,30,.12);
+  color: #ff6060;
+  border-color: rgba(220,50,50,.75);
+  box-shadow: 0 0 14px rgba(220,50,50,.25);
+  animation: active-pulse 2.8s ease-in-out infinite;
+}
 
 .drive-inline {
   display: flex;

gui/index.html

@@ -94,7 +94,7 @@
           S: <span id="overlay-distance">0,00</span> m
         </div>
         <div class="c-xhair">
-          <svg viewBox="-110 -110 220 220" xmlns="http://www.w3.org/2000/svg" width="220" height="220">
+          <svg viewBox="-110 -110 220 220" xmlns="http://www.w3.org/2000/svg" width="100%" height="100%">
             <!-- outer rotating dashed ring -->
             <circle class="xh-rot" cx="0" cy="0" r="103" fill="none" stroke="rgba(0,255,145,.14)" stroke-width="1" stroke-dasharray="4 13"/>
             <!-- roll arc (static) r=96, ±60° from top -->
@@ -158,8 +158,8 @@
               <line x1="-42" y1="-72" x2="42" y2="-72" stroke="rgba(0,255,145,.35)" stroke-width=".5"/>
               <text id="imu-heading-text" x="0" y="-62.5" fill="rgba(0,255,145,.92)" font-size="9" text-anchor="middle" letter-spacing="1">HDG 000°  N</text>
               <!-- roll / pitch readouts -->
-              <text id="imu-roll-text"  x="-73" y="76" fill="rgba(0,255,145,.82)" font-size="7.5" text-anchor="middle">R +0.0°</text>
+              <text id="imu-roll-text"  x="-73" y="76" fill="rgba(0,255,145,.82)" font-size="10.5" text-anchor="middle">R +0.0°</text>
-              <text id="imu-pitch-text" x="73"  y="76" fill="rgba(0,255,145,.82)" font-size="7.5" text-anchor="middle">P +0.0°</text>
+              <text id="imu-pitch-text" x="73"  y="76" fill="rgba(0,255,145,.82)" font-size="10.5" text-anchor="middle">P +0.0°</text>
             </g>
             <!-- center dot -->
             <circle cx="0" cy="0" r="3"   fill="rgba(0,255,145,.92)"/>
@@ -167,7 +167,6 @@
           </svg>
         </div>
         <div class="c-scanlines"></div>
-        <div class="c-vignette"></div>
         </div>
       </div>
     </div>
@@ -324,9 +323,31 @@ var imuOverlayState = {
   pitchDeg: 0,
   yawDeg: 0,
   yawOffsetDeg: 0,
+  rollOffsetDeg: 0,
+  pitchOffsetDeg: 0,
   lastUpdateAt: 0
 };
 
+var hudRGB = [0, 255, 145];
+var xhairSvgOrigHTML = null;
+
+function hudRgba(alpha) {
+  return 'rgba(' + hudRGB[0] + ',' + hudRGB[1] + ',' + hudRGB[2] + ',' + alpha + ')';
+}
+
+function applyHudColor(hex) {
+  var r = parseInt(hex.slice(0, 2), 16);
+  var g = parseInt(hex.slice(2, 4), 16);
+  var b = parseInt(hex.slice(4, 6), 16);
+  if (isNaN(r) || isNaN(g) || isNaN(b)) return;
+  hudRGB = [r, g, b];
+  try { localStorage.setItem('hudHexColor', hex); } catch (e) {}
+  var svgEl = document.querySelector('.c-xhair svg');
+  if (!svgEl) return;
+  if (!xhairSvgOrigHTML) xhairSvgOrigHTML = svgEl.innerHTML;
+  svgEl.innerHTML = xhairSvgOrigHTML.replace(/rgba\(0,255,145,/g, 'rgba(' + r + ',' + g + ',' + b + ',');
+}
+
 function setText(id, text) {
   var el = document.getElementById(id);
   if (el) {
@@ -355,7 +376,7 @@ function formatSignedNumber(value, digits) {
 }
 
 function headingToCompass(deg) {
-  var dirs = ["N","NNE","NE","ENE","E","ESE","SE","SSE","S","SSW","SW","WSW","W","WNW","NW","NNW"];
+  var dirs = ["N","NNO","NO","ONO","O","OSO","SO","SSO","S","SSW","SW","WSW","W","WNW","NW","NNW"];
   return dirs[Math.round(((deg % 360) + 360) % 360 / 22.5) % 16];
 }
 
@@ -806,8 +827,10 @@ function setRosStatus(text) {
   setText("ros-state", text);
 }
 
+var autoRotateActive = false;
+
 function controlsAreBlocked() {
-  return pageConnection.state === "offline";
+  return pageConnection.state === "offline" || autoRotateActive;
 }
 
 function updateControlAvailability() {
@@ -992,12 +1015,19 @@ function updateServiceState(payload) {
   var system = payload.system || {};
   var services = payload.services || {};
   var imuHeading = payload.imu_heading || {};
+  var imuTilt = payload.imu_tilt || {};
   var cameraServiceState = String(services.camera || "");
   var cameraSettingsVersion = Number(services.camera_settings_version || 0);
   if (typeof imuHeading.offset_deg === "number" && !isNaN(imuHeading.offset_deg)) {
     imuOverlayState.yawOffsetDeg = Number(imuHeading.offset_deg);
-    updateImuOverlaySvg();
   }
+  if (typeof imuTilt.roll_offset_deg === "number" && !isNaN(imuTilt.roll_offset_deg)) {
+    imuOverlayState.rollOffsetDeg = Number(imuTilt.roll_offset_deg);
+  }
+  if (typeof imuTilt.pitch_offset_deg === "number" && !isNaN(imuTilt.pitch_offset_deg)) {
+    imuOverlayState.pitchOffsetDeg = Number(imuTilt.pitch_offset_deg);
+  }
+  updateImuOverlaySvg();
   updateUndervoltageDisplay(system.undervoltage || "unbekannt", system.undervoltage_state || "unknown");
   if (cameraServiceState === "active" && lastCameraServiceState && lastCameraServiceState !== "active") {
     setText("cam-state", "Verbinde...");
@@ -1132,12 +1162,14 @@ function drawImuHorizonOverlay(context, canvasWidth, canvasHeight, size) {
   context.save();
   context.translate(cx, cy);
   context.rotate(-rollRad);
+  context.shadowColor = "rgba(0,0,0,.85)";
+  context.shadowBlur = 3;
   context.beginPath();
   context.moveTo(0, -90 * unit);
   context.lineTo(-5.5 * unit, -79 * unit);
   context.lineTo(5.5 * unit, -79 * unit);
   context.closePath();
-  context.fillStyle = "rgba(0,255,145,.88)";
+  context.fillStyle = hudRgba(.88);
   context.fill();
   context.restore();
 
@@ -1146,6 +1178,8 @@ function drawImuHorizonOverlay(context, canvasWidth, canvasHeight, size) {
   context.translate(cx, cy);
   context.rotate(-rollRad);
   context.translate(0, pitchOffsetPx);
+  context.shadowColor = "rgba(0,0,0,.85)";
+  context.shadowBlur = 2.5;
 
   [
     { y: -33, span: 11, op: .28 }, { y: 33,  span: 11, op: .28 },
@@ -1155,12 +1189,12 @@ function drawImuHorizonOverlay(context, canvasWidth, canvasHeight, size) {
     context.beginPath();
     context.moveTo(-pl.span * unit, pl.y * unit);
     context.lineTo(pl.span * unit, pl.y * unit);
-    context.strokeStyle = "rgba(0,255,145," + pl.op + ")";
+    context.strokeStyle = hudRgba(pl.op);
     context.lineWidth = 0.9 * unit;
     context.stroke();
   });
 
-  context.strokeStyle = "rgba(0,255,145,.95)";
+  context.strokeStyle = hudRgba(.95);
   context.lineWidth = 2.8 * unit;
   context.beginPath(); context.moveTo(-60 * unit, 0); context.lineTo(60 * unit, 0); context.stroke();
   context.beginPath(); context.moveTo(-60 * unit, 0); context.lineTo(-52 * unit, -5 * unit); context.stroke();
@@ -1172,13 +1206,15 @@ function drawImuHorizonOverlay(context, canvasWidth, canvasHeight, size) {
   var bw = 84 * unit, bh = 15 * unit;
   context.fillStyle = "rgba(0,15,8,.65)";
   context.fillRect(cx - bw / 2, cy - 72 * unit, bw, bh);
+  context.shadowColor = "rgba(0,0,0,.9)";
+  context.shadowBlur = 3;
   context.font = (9 * unit) + 'px "Consolas","Cascadia Mono",monospace';
-  context.fillStyle = "rgba(0,255,145,.92)";
+  context.fillStyle = hudRgba(.92);
   context.textAlign = "center";
   context.textBaseline = "middle";
   context.fillText("HDG " + String(Math.round(headingDeg)).padStart(3, "0") + "°  " + headingToCompass(headingDeg), cx, cy - 62.5 * unit);
-  context.font = (7.5 * unit) + 'px "Consolas","Cascadia Mono",monospace';
+  context.font = (10.5 * unit) + 'px "Consolas","Cascadia Mono",monospace';
-  context.fillStyle = "rgba(0,255,145,.72)";
+  context.fillStyle = hudRgba(.82);
   context.fillText("R " + formatSignedNumber(rollDeg, 1) + "°", cx - 73 * unit, cy + 76 * unit);
   context.fillText("P " + formatSignedNumber(pitchDeg, 1) + "°", cx + 73 * unit, cy + 76 * unit);
   context.restore();
@@ -1189,67 +1225,76 @@ function drawCrosshairOverlayToCanvas(context, canvasWidth, canvasHeight, size)
   var cy = canvasHeight / 2;
   var unit = size / 180;
 
-  function circle(radius, stroke, lineWidth, dash) {
+  function circle(radius, alpha, lineWidth, dash) {
     context.save();
     context.beginPath();
     context.arc(cx, cy, radius * unit, 0, Math.PI * 2);
     if (dash) context.setLineDash(dash.map(function (value) { return value * unit; }));
-    context.strokeStyle = stroke;
+    context.shadowColor = "rgba(0,0,0,.85)";
+    context.shadowBlur = 2.5;
+    context.strokeStyle = hudRgba(alpha);
     context.lineWidth = lineWidth * unit;
     context.stroke();
     context.restore();
   }
 
-  function line(x1, y1, x2, y2, stroke, lineWidth) {
+  function line(x1, y1, x2, y2, alpha, lineWidth) {
     context.save();
     context.beginPath();
     context.moveTo(cx + (x1 * unit), cy + (y1 * unit));
     context.lineTo(cx + (x2 * unit), cy + (y2 * unit));
-    context.strokeStyle = stroke;
+    context.shadowColor = "rgba(0,0,0,.85)";
+    context.shadowBlur = 2.5;
+    context.strokeStyle = hudRgba(alpha);
     context.lineWidth = lineWidth * unit;
     context.stroke();
     context.restore();
   }
 
-  function path(points, stroke, lineWidth) {
+  function path(points, alpha, lineWidth) {
     context.save();
     context.beginPath();
     context.moveTo(cx + (points[0][0] * unit), cy + (points[0][1] * unit));
     for (var i = 1; i < points.length; i += 1) {
       context.lineTo(cx + (points[i][0] * unit), cy + (points[i][1] * unit));
     }
-    context.strokeStyle = stroke;
+    context.shadowColor = "rgba(0,0,0,.85)";
+    context.shadowBlur = 2.5;
+    context.strokeStyle = hudRgba(alpha);
     context.lineWidth = lineWidth * unit;
     context.stroke();
     context.restore();
   }
 
-  circle(82, "rgba(0,255,145,.2)", 1, [4, 10]);
+  circle(82, .2, 1, [4, 10]);
-  circle(60, "rgba(0,255,145,.15)", 0.75, [2, 16]);
+  circle(60, .15, 0.75, [2, 16]);
-  circle(16, "rgba(0,255,145,.3)", 0.75);
+  circle(16, .3, 0.75);
-  line(-86, 0, -19, 0, "rgba(0,255,145,.6)", 1);
+  line(-86, 0, -19, 0, .6, 1);
-  line(19, 0, 86, 0, "rgba(0,255,145,.6)", 1);
+  line(19, 0, 86, 0, .6, 1);
-  line(0, -86, 0, -19, "rgba(0,255,145,.6)", 1);
+  line(0, -86, 0, -19, .6, 1);
-  line(0, 19, 0, 86, "rgba(0,255,145,.6)", 1);
+  line(0, 19, 0, 86, .6, 1);
-  line(-60, -6, -60, 6, "rgba(0,255,145,.45)", 0.75);
+  line(-60, -6, -60, 6, .45, 0.75);
-  line(60, -6, 60, 6, "rgba(0,255,145,.45)", 0.75);
+  line(60, -6, 60, 6, .45, 0.75);
-  line(-6, -60, 6, -60, "rgba(0,255,145,.45)", 0.75);
+  line(-6, -60, 6, -60, .45, 0.75);
-  line(-6, 60, 6, 60, "rgba(0,255,145,.45)", 0.75);
+  line(-6, 60, 6, 60, .45, 0.75);
-  line(-38, -3.5, -38, 3.5, "rgba(0,255,145,.3)", 0.5);
+  line(-38, -3.5, -38, 3.5, .3, 0.5);
-  line(38, -3.5, 38, 3.5, "rgba(0,255,145,.3)", 0.5);
+  line(38, -3.5, 38, 3.5, .3, 0.5);
-  line(-3.5, -38, 3.5, -38, "rgba(0,255,145,.3)", 0.5);
+  line(-3.5, -38, 3.5, -38, .3, 0.5);
-  line(-3.5, 38, 3.5, 38, "rgba(0,255,145,.3)", 0.5);
+  line(-3.5, 38, 3.5, 38, .3, 0.5);
-  path([[-74, -58], [-74, -74], [-58, -74]], "rgba(0,255,145,.75)", 1.5);
+  path([[-74, -58], [-74, -74], [-58, -74]], .75, 1.5);
-  path([[58, -74], [74, -74], [74, -58]], "rgba(0,255,145,.75)", 1.5);
+  path([[58, -74], [74, -74], [74, -58]], .75, 1.5);
-  path([[-74, 58], [-74, 74], [-58, 74]], "rgba(0,255,145,.75)", 1.5);
+  path([[-74, 58], [-74, 74], [-58, 74]], .75, 1.5);
-  path([[58, 74], [74, 74], [74, 58]], "rgba(0,255,145,.75)", 1.5);
+  path([[58, 74], [74, 74], [74, 58]], .75, 1.5);
-  circle(6, "rgba(0,255,145,.7)", 1);
+  circle(6, .7, 1);
 
   context.save();
+  context.shadowColor = "rgba(0,0,0,.85)";
+  context.shadowBlur = 3;
   context.beginPath();
   context.arc(cx, cy, 2.5 * unit, 0, Math.PI * 2);
-  context.fillStyle = "rgba(0,255,145,.9)";
+  context.fillStyle = hudRgba(.9);
   context.fill();
+  context.shadowBlur = 0;
   context.beginPath();
   context.arc(cx, cy, 1 * unit, 0, Math.PI * 2);
   context.fillStyle = "rgba(255,255,255,.7)";
@@ -1262,17 +1307,9 @@ function drawCrosshairOverlayToCanvas(context, canvasWidth, canvasHeight, size)
 function drawVignetteAndScanlines(context, canvasWidth, canvasHeight) {
   context.save();
   for (var y = 0; y < canvasHeight; y += 4) {
-    context.fillStyle = "rgba(0,255,145,.012)";
+    context.fillStyle = hudRgba(.012);
     context.fillRect(0, y, canvasWidth, 1);
   }
-  var vignette = context.createRadialGradient(
-    canvasWidth * 0.5, canvasHeight * 0.5, canvasWidth * 0.25,
-    canvasWidth * 0.5, canvasHeight * 0.5, canvasWidth * 0.75
-  );
-  vignette.addColorStop(0, "rgba(0,0,0,0)");
-  vignette.addColorStop(1, "rgba(0,0,0,.58)");
-  context.fillStyle = vignette;
-  context.fillRect(0, 0, canvasWidth, canvasHeight);
   context.restore();
 }
 
@@ -1330,7 +1367,7 @@ function drawHudOverlayToCanvas(context, canvasWidth, canvasHeight) {
   context.fillText(document.getElementById("cam-live-text").textContent, canvasWidth / 2 + (6 * camScale * scaleToCanvas), padding);
   context.restore();
 
-  drawCrosshairOverlayToCanvas(context, canvasWidth, canvasHeight, 270 * camScale * scaleToCanvas);
+  drawCrosshairOverlayToCanvas(context, canvasWidth, canvasHeight, 405 * camScale * scaleToCanvas);
   drawVignetteAndScanlines(context, canvasWidth, canvasHeight);
 }
 
@@ -1535,7 +1572,16 @@ function toggleStatPanel() {
   setStatPanelCollapsed(!panel.classList.contains("collapsed"));
 }
 
+window.addEventListener("storage", function (e) {
+  if (e.key === "hudHexColor" && e.newValue) applyHudColor(e.newValue);
+  if (e.key === "autoRotateActive") {
+    autoRotateActive = e.newValue === "1";
+    if (!autoRotateActive) { setAxes(0, 0); }
+  }
+});
+
 window.addEventListener("load", function () {
+  try { var h = localStorage.getItem("hudHexColor"); if (h) applyHudColor(h); } catch (e) {}
   setText("cam-host", hostUrl);
   updateModeDisplay();
   updateMotorDisplay();
@@ -1709,8 +1755,8 @@ window.addEventListener("load", function () {
       Number(orientation.z || 0),
       Number(orientation.w || 1)
     ]);
-    imuOverlayState.rollDeg = euler.rollDeg;
+    imuOverlayState.rollDeg = euler.rollDeg + imuOverlayState.rollOffsetDeg;
-    imuOverlayState.pitchDeg = euler.pitchDeg;
+    imuOverlayState.pitchDeg = euler.pitchDeg + imuOverlayState.pitchOffsetDeg;
     imuOverlayState.yawDeg = euler.yawDeg;
     imuOverlayState.lastUpdateAt = Date.now();
     updateImuOverlaySvg();

scripts/auto_rotate_ros.py

@@ -0,0 +1,119 @@
+#!/usr/bin/env python
+# -*- coding: utf-8 -*-
+"""
+Laeuft INNERHALB des Docker-Containers mit nativem rospy.
+Dreht den Rover auf der Stelle zu einem Ziel-Heading und beendet sich.
+
+Aufruf:
+    python3 auto_rotate_ros.py <target_deg> <restore_mode> <heading_offset_deg>
+
+Exit-Codes:
+    0 = Ziel erreicht
+    1 = Fehler
+"""
+
+import math
+import signal
+import sys
+import time
+
+import rospy
+from exomy.msg import RoverCommand
+from sensor_msgs.msg import Imu
+
+_POINT_TURN = 2
+_DONE_DEG   = float(sys.argv[4]) if len(sys.argv) > 4 else 1.0
+_VEL        = int(sys.argv[5])   if len(sys.argv) > 5 else 20
+
+target_deg      = float(sys.argv[1]) % 360
+restore_mode    = int(sys.argv[2])
+heading_offset  = float(sys.argv[3])
+
+_running   = True
+_publisher = None
+_heading   = None
+
+
+def _normalize(deg):
+    return (float(deg) % 360 + 360) % 360
+
+
+def _shortest_error(current, target):
+    return (target - current + 540) % 360 - 180
+
+
+def _on_imu(msg):
+    global _heading
+    o = msg.orientation
+    x, y, z, w = o.x, o.y, o.z, o.w
+    siny = 2.0 * (w * z + x * y)
+    cosy = 1.0 - 2.0 * (y * y + z * z)
+    yaw_deg = math.degrees(math.atan2(siny, cosy))
+    _heading = _normalize(yaw_deg + heading_offset)
+
+
+def _publish(locomotion_mode, vel, steering=0):
+    if _publisher is None:
+        return
+    cmd = RoverCommand()
+    cmd.connected       = True
+    cmd.motors_enabled  = True
+    cmd.locomotion_mode = locomotion_mode
+    cmd.vel             = vel
+    cmd.steering        = steering
+    _publisher.publish(cmd)
+
+
+def _shutdown(signum, frame):
+    global _running
+    _running = False
+
+
+def main():
+    global _publisher, _running
+
+    signal.signal(signal.SIGTERM, _shutdown)
+    signal.signal(signal.SIGINT,  _shutdown)
+
+    rospy.init_node('auto_rotate', anonymous=True, disable_signals=True)
+
+    _publisher = rospy.Publisher('/rover_command', RoverCommand, queue_size=1)
+    rospy.Subscriber('/imu/data', Imu, _on_imu, queue_size=1)
+    rospy.set_param('/auto_rotate_active', True)
+
+    # Kurz warten bis IMU-Daten ankommen
+    deadline = time.time() + 5.0
+    while _heading is None and time.time() < deadline and _running:
+        time.sleep(0.05)
+
+    if _heading is None:
+        rospy.logerr('auto_rotate: keine IMU-Daten')
+        rospy.set_param('/auto_rotate_active', False)
+        _publish(restore_mode, vel=0)
+        sys.exit(1)
+
+    rate = rospy.Rate(50)  # 50 Hz, passend zum PWM-Chip
+
+    while _running and not rospy.is_shutdown():
+        error = _shortest_error(_heading, target_deg)
+
+        if abs(error) <= _DONE_DEG:
+            rospy.set_param('/auto_rotate_active', False)
+            _publish(restore_mode, vel=0)
+            sys.exit(0)
+
+        # Richtung wie Joystick: immer positiver vel, steering ±180 fuer Richtung
+        if error > 0:
+            _publish(_POINT_TURN, vel=_VEL, steering=0)
+        else:
+            _publish(_POINT_TURN, vel=_VEL, steering=180)
+        rate.sleep()
+
+    # Abbruch per Signal
+    rospy.set_param('/auto_rotate_active', False)
+    _publish(restore_mode, vel=0)
+    sys.exit(0)
+
+
+if __name__ == '__main__':
+    main()

scripts/exomy_admin_api.py

@@ -32,6 +32,9 @@ CAMERA_RUNTIME_SETTINGS_FILE = '/tmp/exomy_camera_settings.json'
 IMU_HEADING_CALIBRATION_FILE = os.path.join(
     os.path.dirname(__file__), '..', 'config', 'imu_heading_calibration.json'
 )
+IMU_TILT_CALIBRATION_FILE = os.path.join(
+    os.path.dirname(__file__), '..', 'config', 'imu_tilt_calibration.json'
+)
 MOTOR_TEST_LOCK = threading.Lock()
 GPS_PORT_PATTERNS = [
     '/dev/serial/by-id/*',
@@ -82,6 +85,7 @@ IMU_ROS_LOCK = threading.Lock()
 IMU_ROS_THREAD = None
 IMU_ROS_CLIENT = None
 IMU_ROS_TOPICS = []
+LAST_LOCOMOTION_MODE = 1  # ACKERMANN als Fallback
 IMU_ROS_CACHE = {
     'state': 'unknown',
     'status': 'Warte auf ROS',
@@ -91,6 +95,8 @@ IMU_ROS_CACHE = {
     'magnetic': 'unbekannt',
     'quaternion': 'unbekannt',
     'roll_pitch_yaw': 'unbekannt',
+    'roll_deg': None,
+    'pitch_deg': None,
     'error': 'Noch keine IMU-Daten aus ROS',
     'heading_deg': None,
     'updated_at': 0.0,
@@ -195,6 +201,8 @@ def _on_imu_data_message(message):
         ), 'rad/s', 3),
         quaternion=_format_quaternion(quaternion),
         roll_pitch_yaw=_format_euler_deg(euler_deg),
+        roll_deg=None if not euler_deg else euler_deg[0],
+        pitch_deg=None if not euler_deg else euler_deg[1],
         heading_deg=None if not euler_deg else _normalize_heading_deg(euler_deg[2]),
         error='',
     )
@@ -220,6 +228,7 @@ def _connect_imu_ros():
     global IMU_ROS_CLIENT, IMU_ROS_TOPICS
 
     import roslibpy
+    import imu_rotate
 
     client = roslibpy.Ros(host=ROSBRIDGE_HOST, port=ROSBRIDGE_PORT)
     client.run()
@@ -232,14 +241,26 @@ def _connect_imu_ros():
     imu_topic = roslibpy.Topic(client, '/imu/data', 'sensor_msgs/Imu')
     mag_topic = roslibpy.Topic(client, '/imu/mag', 'sensor_msgs/MagneticField')
     status_topic = roslibpy.Topic(client, '/imu/status', 'std_msgs/String')
+    rover_cmd_topic = roslibpy.Topic(client, '/rover_command', 'exomy/RoverCommand')
+    def _on_rover_cmd_message(message):
+        global LAST_LOCOMOTION_MODE
+        import imu_rotate
+        if not imu_rotate.get_rotate_status()['running']:
+            mode = message.get('locomotion_mode')
+            if mode is not None:
+                LAST_LOCOMOTION_MODE = int(mode)
+
     imu_topic.subscribe(_on_imu_data_message)
     mag_topic.subscribe(_on_imu_mag_message)
     status_topic.subscribe(_on_imu_status_message)
+    rover_cmd_topic.subscribe(_on_rover_cmd_message)
+    rover_cmd_topic.advertise()
     IMU_ROS_CLIENT = client
-    IMU_ROS_TOPICS = [imu_topic, mag_topic, status_topic]
+    IMU_ROS_TOPICS = [imu_topic, mag_topic, status_topic, rover_cmd_topic]
     _imu_ros_cache_update(status='ROS verbunden', error='')
 
 
+
 def _imu_ros_worker():
     global IMU_ROS_CLIENT, IMU_ROS_TOPICS
 
@@ -856,6 +877,7 @@ def collect_status():
     container_details = get_container_details(EXOMY_CONTAINER)
     imu_details = read_imu_ros_status()
     imu_heading = get_imu_heading_status()
+    imu_tilt = get_imu_tilt_status()
     return {
         'status': 'Bereit',
         'system': {
@@ -899,6 +921,7 @@ def collect_status():
         },
         'imu': imu_details,
         'imu_heading': imu_heading,
+        'imu_tilt': imu_tilt,
     }
 
 
@@ -1142,6 +1165,85 @@ def calibrate_imu_heading_to_north():
     }
 
 
+def get_default_imu_tilt_calibration():
+    return {
+        'roll_offset_deg': 0.0,
+        'pitch_offset_deg': 0.0,
+        'updated_at': None,
+        'source': 'default',
+    }
+
+
+def read_imu_tilt_calibration():
+    data = get_default_imu_tilt_calibration()
+    try:
+        with open(IMU_TILT_CALIBRATION_FILE, 'r', encoding='utf-8') as handle:
+            payload = json.load(handle)
+        data['roll_offset_deg'] = float(payload.get('roll_offset_deg', 0.0))
+        data['pitch_offset_deg'] = float(payload.get('pitch_offset_deg', 0.0))
+        data['updated_at'] = payload.get('updated_at')
+        data['source'] = payload.get('source', 'file')
+    except (OSError, ValueError, KeyError):
+        pass
+    return data
+
+
+def write_imu_tilt_calibration(roll_offset_deg, pitch_offset_deg):
+    payload = {
+        'roll_offset_deg': float(roll_offset_deg),
+        'pitch_offset_deg': float(pitch_offset_deg),
+        'updated_at': time.strftime('%Y-%m-%dT%H:%M:%S'),
+        'source': 'admin',
+    }
+    os.makedirs(os.path.dirname(IMU_TILT_CALIBRATION_FILE), exist_ok=True)
+    with open(IMU_TILT_CALIBRATION_FILE, 'w', encoding='utf-8') as handle:
+        json.dump(payload, handle, indent=2)
+    return payload
+
+
+def get_imu_tilt_status():
+    calibration = read_imu_tilt_calibration()
+    with IMU_ROS_LOCK:
+        raw_roll_deg = IMU_ROS_CACHE.get('roll_deg')
+        raw_pitch_deg = IMU_ROS_CACHE.get('pitch_deg')
+    corrected_roll = None if raw_roll_deg is None else raw_roll_deg + calibration['roll_offset_deg']
+    corrected_pitch = None if raw_pitch_deg is None else raw_pitch_deg + calibration['pitch_offset_deg']
+    return {
+        'roll_offset_deg': calibration['roll_offset_deg'],
+        'pitch_offset_deg': calibration['pitch_offset_deg'],
+        'raw_roll_deg': raw_roll_deg,
+        'raw_pitch_deg': raw_pitch_deg,
+        'corrected_roll_deg': corrected_roll,
+        'corrected_pitch_deg': corrected_pitch,
+        'updated_at': calibration['updated_at'],
+        'source': calibration['source'],
+    }
+
+
+def zero_imu_tilt():
+    with IMU_ROS_LOCK:
+        raw_roll_deg = IMU_ROS_CACHE.get('roll_deg')
+        raw_pitch_deg = IMU_ROS_CACHE.get('pitch_deg')
+
+    if raw_roll_deg is None or raw_pitch_deg is None:
+        return 409, {'status': 'Noch keine frischen IMU-Daten für Neigungskalibrierung'}
+
+    payload = write_imu_tilt_calibration(-float(raw_roll_deg), -float(raw_pitch_deg))
+    return 200, {
+        'status': 'Neigung genullt',
+        'imu_tilt': {
+            'roll_offset_deg': payload['roll_offset_deg'],
+            'pitch_offset_deg': payload['pitch_offset_deg'],
+            'raw_roll_deg': raw_roll_deg,
+            'raw_pitch_deg': raw_pitch_deg,
+            'corrected_roll_deg': 0.0,
+            'corrected_pitch_deg': 0.0,
+            'updated_at': payload['updated_at'],
+            'source': payload['source'],
+        },
+    }
+
+
 def set_camera_config(profile_id=None, fps=None):
     current = read_camera_settings()
     if profile_id is None:
@@ -1869,6 +1971,20 @@ class Handler(http.server.BaseHTTPRequestHandler):
         self.end_headers()
 
     def do_GET(self):
+        if self.path == '/api/imu/rotate-status':
+            import imu_rotate
+            status = imu_rotate.get_rotate_status()
+            if status.get('running') and status.get('target_deg') is not None:
+                calibration = read_imu_heading_calibration()
+                with IMU_ROS_LOCK:
+                    raw = IMU_ROS_CACHE.get('heading_deg')
+                corrected = get_corrected_heading_deg(raw, calibration['offset_deg']) if raw is not None else None
+                status['current_deg'] = round(corrected, 1) if corrected is not None else None
+                if corrected is not None:
+                    err = (status['target_deg'] - corrected + 540) % 360 - 180
+                    status['error_deg'] = round(err, 1)
+            self.write_json(200, {'rotate': status})
+            return
         if self.path == '/api/delay':
             self.write_json(200, {'delay_seconds': get_delay()})
             return
@@ -1911,7 +2027,8 @@ class Handler(http.server.BaseHTTPRequestHandler):
 
     def do_POST(self):
         raw_body = b'{}'
-        if self.path in ('/api/routes/save', '/api/routes/delete', '/api/imu/heading-offset'):
+        if self.path in ('/api/routes/save', '/api/routes/delete', '/api/imu/heading-offset',
+                         '/api/imu/rotate-to'):
             try:
                 content_length = int(self.headers.get('Content-Length', '0'))
             except ValueError:
@@ -2197,6 +2314,43 @@ class Handler(http.server.BaseHTTPRequestHandler):
             self.write_json(status_code, response)
             return
 
+        if self.path == '/api/imu/set-level':
+            status_code, response = zero_imu_tilt()
+            self.write_json(status_code, response)
+            return
+
+
+        if self.path == '/api/imu/rotate-to':
+            try:
+                payload = json.loads(raw_body.decode('utf-8'))
+                target_deg = float(payload.get('target_deg', 0))
+                speed_pct = max(20, min(50, int(payload.get('speed_pct', 20))))
+            except (UnicodeDecodeError, json.JSONDecodeError, TypeError, ValueError):
+                self.write_json(400, {'status': 'Ungültige Anfrage'})
+                return
+            with IMU_ROS_LOCK:
+                heading = IMU_ROS_CACHE.get('heading_deg')
+            if heading is None:
+                self.write_json(409, {'status': 'Noch keine frischen IMU-Daten'})
+                return
+            import imu_rotate
+            heading_offset = read_imu_heading_calibration()['offset_deg']
+            vel = max(1, int(100.0 * (speed_pct / 100.0) ** 2.0))
+            status = imu_rotate.start_rotate(
+                target_deg=target_deg,
+                heading_offset=heading_offset,
+                restore_mode=LAST_LOCOMOTION_MODE,
+                vel=vel,
+            )
+            self.write_json(200, {'status': 'Drehung gestartet', 'rotate': status})
+            return
+
+        if self.path == '/api/imu/rotate-stop':
+            import imu_rotate
+            imu_rotate.stop_rotate()
+            self.write_json(200, {'status': 'Drehung gestoppt', 'rotate': imu_rotate.get_rotate_status()})
+            return
+
         actions = {
             '/api/cold-start-gps': {
                 'handler': cold_start_gps_receiver,

scripts/imu_rotate.py

@@ -0,0 +1,112 @@
+"""
+Startet auto_rotate_ros.py via docker exec im ExoMy-Container.
+Das Script läuft dort nativ mit rospy — kein WebSocket-Overhead.
+
+Öffentliche API:
+    start_rotate(target_deg, heading_offset, restore_mode) -> dict
+    stop_rotate()
+    get_rotate_status() -> dict
+"""
+
+import subprocess
+import threading
+import time
+
+_CONTAINER     = 'exomy_autostart'
+_SCRIPT_PATH   = '/root/exomy_ws/src/exomy/scripts/auto_rotate_ros.py'
+_ROS_SETUP     = 'source /opt/ros/melodic/setup.bash && source /root/exomy_ws/devel/setup.bash'
+
+_lock          = threading.Lock()
+_proc          = None          # subprocess.Popen (docker exec)
+_monitor_thread = None
+
+_status = {
+    'running':     False,
+    'target_deg':  None,
+    'result':      'idle',
+    'message':     '',
+}
+
+
+def _monitor(proc, target_deg, restore_mode):
+    """Wartet auf Prozessende und aktualisiert Status."""
+    global _proc
+    returncode = proc.wait()
+    with _lock:
+        if _proc is proc:   # nicht überschrieben durch neuen Start
+            _proc = None
+            _status['running'] = False
+            if returncode == 0:
+                _status['result']  = 'done'
+                _status['message'] = 'Ziel erreicht'
+            elif returncode == -15 or returncode == 143:
+                _status['result']  = 'aborted'
+                _status['message'] = 'Abgebrochen'
+            else:
+                _status['result']  = 'error'
+                _status['message'] = 'Fehler (exit {})'.format(returncode)
+
+
+def start_rotate(target_deg, heading_offset, restore_mode=1, done_deg=1.0, vel=None):
+    global _proc, _monitor_thread, _status
+
+    stop_rotate()
+
+    target_deg = float(target_deg) % 360
+
+    if vel is None:
+        # Fest 20% Geschwindigkeit, unabhängig vom Admin-Speed-Limit
+        # Entspricht dem Joystick-Expo: 100 * (20/100)^2 = 4
+        vel = 4
+
+    cmd = [
+        'docker', 'exec', _CONTAINER, 'bash', '-c',
+        '{setup} && python {script} {target} {mode} {offset} {done} {vel}'.format(
+            setup=_ROS_SETUP,
+            script=_SCRIPT_PATH,
+            target=target_deg,
+            mode=int(restore_mode),
+            offset=float(heading_offset),
+            done=float(done_deg),
+            vel=int(vel),
+        )
+    ]
+
+    proc = subprocess.Popen(cmd, stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL)
+
+    with _lock:
+        _proc = proc
+        _status = {
+            'running':    True,
+            'target_deg': round(target_deg, 1),
+            'result':     'running',
+            'message':    'Drehe zu {:.0f}°'.format(target_deg),
+        }
+
+    _monitor_thread = threading.Thread(
+        target=_monitor,
+        args=(proc, target_deg, restore_mode),
+        daemon=True,
+    )
+    _monitor_thread.start()
+    return get_rotate_status()
+
+
+def stop_rotate():
+    global _proc
+    with _lock:
+        proc = _proc
+        _proc = None
+
+    if proc is not None and proc.poll() is None:
+        # SIGTERM an den docker-exec-Prozess → Container-Prozess beendet sich sauber
+        proc.terminate()
+        try:
+            proc.wait(timeout=3.0)
+        except subprocess.TimeoutExpired:
+            proc.kill()
+
+
+def get_rotate_status():
+    with _lock:
+        return dict(_status)

src/imu_node.py

@@ -141,24 +141,25 @@ def publish_measurements(imu_topic, mag_topic, status_topic, sensor):
     magnetic = sensor.magnetic
     quaternion = sensor.quaternion
 
+    # Sensor ist um 90° um die Z-Achse verdreht eingebaut → X- und Y-Achse tauschen
     imu_topic.publish(roslibpy.Message({
         'header': {'stamp': stamp, 'frame_id': FRAME_ID},
         'orientation': {
-            'x': quaternion[0],
+            'x': quaternion[1],
-            'y': quaternion[1],
+            'y': quaternion[0],
             'z': quaternion[2],
             'w': quaternion[3],
         },
         'orientation_covariance': [0.0] * 9,
         'angular_velocity': {
-            'x': gyro[0],
+            'x': gyro[1],
-            'y': gyro[1],
+            'y': gyro[0],
             'z': gyro[2],
         },
         'angular_velocity_covariance': [0.0] * 9,
         'linear_acceleration': {
-            'x': acceleration[0],
+            'x': acceleration[1],
-            'y': acceleration[1],
+            'y': acceleration[0],
             'z': acceleration[2],
         },
         'linear_acceleration_covariance': [0.0] * 9,
@@ -167,8 +168,8 @@ def publish_measurements(imu_topic, mag_topic, status_topic, sensor):
     mag_topic.publish(roslibpy.Message({
         'header': {'stamp': stamp, 'frame_id': FRAME_ID},
         'magnetic_field': {
-            'x': magnetic[0] * 1e-6,
+            'x': magnetic[1] * 1e-6,
-            'y': magnetic[1] * 1e-6,
+            'y': magnetic[0] * 1e-6,
             'z': magnetic[2] * 1e-6,
         },
         'magnetic_field_covariance': [0.0] * 9,

src/joystick_parser_node.py

@@ -180,6 +180,9 @@ def callback(data):
     global last_webgui_time
     global last_locomotion_mode
 
+    if rospy.get_param('/auto_rotate_active', False):
+        return
+
     is_webgui = data.header.frame_id == "webgui"
     now = rospy.Time.now()